How to Make Silicone Molds for Custom Funko Pops
Silicone Molds for Custom Funko Pops
If you have ever wanted to create your own custom funko pops, you will need a silicone mold. You can make your own by following the instructions on the packaging. First, you must create a pattern. This is the object that will be used as the negative in your silicone mold. It can be a real object or something that you already have. You can use this to make a pattern. If you are a kid, you can try carving your own patterns out of clay. If you prefer something flat, you can also carve a design out of wood.
Next, you need to mix the silicone. It is easy to mix, as long as you follow the recipe carefully. Oomoo 30 is a great choice. It is also cheap and easy to use. The recommended ratio is one to one. When mixing the silicone, make sure the silicone is mixed well to ensure the color is uniform throughout. You must also avoid any air bubbles, which are often trapped in the mold. To remove these air bubbles, you can use a vacuum chamber or a thin stream of the silicone. If this doesn’t work, you can force the air bubbles to rise to the surface by using a tool that vibrates.
Once you have prepared the custom silicone molds, you can begin to create the custom funko pops. The process of making these molds is simple and quick. The first step is to prepare the material. You need to mix the silicone with hardener. Then, you must put the workpiece into the mold. After it dries, you must apply a mold wax release to remove the workpiece. It is important to avoid caked layers of wax because this can affect the quality of the surface. In addition, caked layers of wax can also show up in a negative mold.
How to Make Silicone Molds for Custom Funko Pops
To start the process, you need to create the silicone mold. It is important to have an opening at the end of the blank so that you can cut it open once the silicone has hardened. You can use either soft or high-hard silicone for your molds. The key is to use a silicone mold that works best for you. If you are not sure how to make a custom funko pop, the kit will help you learn the process and get your hands on the proper materials to make your own unique funko pops.
The basic material for a silicone mold is silicone rubber. This is a soft mass that hardens rapidly. The silicone is highly elastic, but not infinitely flexible. The degree of hardness determines how brittle the silicone is. Different kinds of silicone rubber will have different degrees of hardness. The higher the Shore number, the more elasticity the material has. Usually, a silicone mold with a Shore value of 20 or less is more brittle.